The company Teslacigs has produced a starter kit Terminator kit 90W. Despite the presence of the board and the lack of a display, in fact the box-mode works like a mechanical mod.
Appearance boxing fashion
On top is a steel 510 connector, with a spring-loaded brass silvered pin.
The case of the Terminator Tesla device is made of metal, zinc alloy.
The setup works on a single 18650 mAh battery. The cover of the device is held by two magnets, another pair of magnets on the device itself. On the inside of the cover information about the charge current.
The mod is designed for 22 mm atoms. In devaysa there is no display, but there is a light indication, indicating the level of charging the battery.
Once the faer button is turned on, a blue light comes on.
Red LED light indicates that the battery voltage is from 3.0 to 3.7V. Blue light is from 3.7 to 4.2V.
The board provides protection from short circuit, recharge battery, as well as overheating and low voltage. The manufacturer states that the minimum resistance in the coil reservoir should be 0.1 Ω. However, the setup raises the resistance on the fusion 0.07 Ohm.
The micro-USB connector for charging the battery is located on the side of the setup. Charges with a current of 2A, quickly charges the battery. In fashion mode passthrough, which means you can simultaneously charge the battery and soar the device.
The tank Antman Tesla is made of stainless steel, grade 304. The upper part has a drip-type, which is removed with the top cover – top-cap. Put another drip-type will not work. Top-cap with speed back protection will protect against splashes of liquid.
The base of the drip is miniature, 22 mm high, has velocity-like stands, 2.3 mm diameter spirals, the racks are vertically arranged, the distance between them is 5 mm, on each post there are two holes.
Coils are fixed with screws, fastened with screws with a cross-head screwdriver. The base of the base is not deep, since the base is still 22 mm thick and holds 5 ml of liquid.
Two drums are provided for dripping: the lower blowing and, perhaps more correctly, the upper-side airflow. The last blowing is created by six holes, it is regulated by means of a top-cap. 3 ways to adjust the airflow. Rotating the top-cap, you can open three, two or one blowing hole.
Dimensions and specifications of the mod
Height: 80 mm
Width: 36.5 mm
Thickness: 22 mm
Battery: 18650 mAh
P max: 90W
R min: 0.1 Ω
Housing: zinc alloy
Weight with atomizer-without battery: 132 g., With battery: 178 g.
Dimensions and technical characteristics of the tank Antman Tesla
Height: 31 mm
Diameter: 22 mm
Material: steel, stainless steel, grade 304 Bath
depth: 5 mm
Blowing: 3 adjustment positions
The starter-whale comes in an orange tube, which opens on both sides. We open on one side and find out the device, instruction and vandal-proof USB cable, on the other – drip atomizer Antman Tesla 22 RDA.
The kit also includes: a screwdriver, replacement coils -2pcs., Spare bolts for a Phillips screwdriver, screwdriver, a packet with organic cotton (Japan), instruction in English.
Lows / Pros
– the top cap of the top cap is kept only in one ring, so it can fly, – a
small bath, so the liquid will quickly end, 6-7 puffs and need to be dripped,
-2-3 dressing drips with liquid and the battery will need to be charged for a day you need to have 6 charged batteries or constantly be able to recharge them,
– on some box-modes the backlash of the battery cover
– not all the batteries “see”, so you need to take the device and go to the store. Accumulators “sees” from 2800 mAh.
– the setup is nice in the hand, compact, beautiful design,
– the device normally loads, works well, it is perhaps one of the powerful devices for 1 battery,
– it is possible to soar when charging the battery. By changing the light of the display, it is clear that the cutoff is worthwhile, when you start to soar, the light from red changes to blue.
– Excellent price – from 25 to 30 $.
Now It’s Available : Tesla Terminator Kit
Hot Sale Recommendation: